Baukasten ToGo: Joint Case with Pocket Ashtray
Built for the road.
The Baukasten ToGo is a compact joint case for pre-rolled J's: room for 2 king size pre-rolls, your lighter (BIC Maxi or Clipper) and a built-in pocket ashtray on the underside. 3D-printed from corn-based bioplastic in South Tyrol. Fits in any pocket, clips onto any backpack thanks to the carabiner: ready when you are.
Clean. Secure. Always with you. In Black, Magenta or Rainbow.
Rainbow is one of a kind. The color gradient is created during 3D printing, so every single piece looks different. Sometimes more pastel yellow, sometimes more pink, sometimes more mint. The product photo shows three Rainbow pieces side by side so you get a feel for the range. Which combination ends up with you is down to the printer. That is exactly the appeal.
Case Only or Complete Set? Your call.
The Baukasten ToGo comes in two versions. Same case, different contents.
- Case Only: just the 3D-printed case in the color of your choice. For everyone who already has their lighter and filters sorted.
- Complete Set: the case plus 1x Clipper and 1x Bag 22 with 22 Hybrid Supreme activated charcoal filters (Ø 6.4 mm). Unpack, pack up, head out.
Nothing changes about the case itself. Only whether you still have to go looking for things before your first joint.
What makes the Baukasten ToGo special
- Partner in crime. Two pre-rolled J's and the fire of your choice travel safe: the Zippo-style flip-top closure with strong magnets keeps everything shut, nothing gets crushed, nothing goes missing.
- Leave no trace. The built-in pocket ashtray takes your extinguished ends. Nature stays clean and you don't have to carry an extra container around.
- Handy size. 11.8 × 6.5 × 2.1 cm and 80 g empty. Only as big as it needs to be, so light you barely notice it.
- Ready for adventure. Scratch-resistant surface plus carabiner: onto the backpack, onto the belt loop, off you go. The ToGo feels right at home outdoors.
- Flexible with fire. The lighter compartment fits both BIC Maxi and Clipper. However it suits you.
- Sustainable and local. 3D-printed from corn-based bioplastic (PLA) in South Tyrol, Italy. Short distances, clean conscience.
What's in the box
Case Only
- 1x 3D-printed case in the color of your choice, with built-in pocket ashtray and carabiner.
Complete Set
- 1x 3D-printed case in the color of your choice, with built-in pocket ashtray and carabiner.
- 1x Clipper lighter: fire is included from day one and sits snugly in the lighter compartment.
- 1x Bag 22: 22 Hybrid Supreme activated charcoal filters in Slim Size (Ø 6.4 mm), in a resealable bag. For the rounds after that.
How the joint case is built
- Pre-roll slot: room for 2 king size pre-rolls, up to 14 cm long and 12 mm thick.
- Lighter compartment: made for BIC Maxi or Clipper.
- Pocket ashtray: built into the underside, for extinguished ends on the go.
- Carabiner: clip it on instead of searching for it.
Technical data
| Material | corn-based bioplastic (PLA), food-safe |
|---|---|
| Production | 3D-printed in South Tyrol, Italy |
| Dimensions | 11.8 cm (L) × 6.5 cm (W) × 2.1 cm (H) |
| Weight | 80 g (case without accessories) |
| Closure | Zippo-style flip-top with strong magnets (note: contain nickel) |
| Capacity | 2 pre-rolls (up to 14 cm long, 12 mm Ø) plus 1 lighter (BIC Maxi or Clipper) |
| Colors | Black, Magenta, Rainbow (every Rainbow piece is one of a kind) |
| Versions | Case Only or Complete Set (with Clipper and Bag 22) |
Product notes and care
Good to know
- Avoid temperatures above 50 degrees Celsius, otherwise the material can warp slightly. So don't leave it in the sun in your car.
- Keep away from children because of the small parts.
- Not dishwasher safe.
- The material is food-safe: direct contact with your herbs is no problem.
- Allergy note: the built-in magnets contain nickel.
Cleaning and care
- Wipe off normal dirt with soap and water.
- Treat grease marks or fingerprints with high-percentage alcohol.
- Smooth out scratches or small loose fibers carefully with a lighter flame or fine sandpaper (grit above 1500).
FAQ. Baukasten ToGo
What is a joint case?
A joint case is a hard protective shell for pre-rolled joints so they don't get crushed or bent on the go. The Baukasten ToGo carries 2 king size pre-rolls plus a lighter and also has a built-in pocket ashtray on the underside.
What is the difference between Case Only and Complete Set?
Case Only gets you the 3D-printed case on its own. The Complete Set adds 1x Clipper and 1x Bag 22 with 22 Hybrid Supreme activated charcoal filters (Ø 6.4 mm). The case itself is identical in both versions.
Does a Clipper fit inside?
Yes, both Clipper and BIC Maxi fit nicely. Snug, but with room to breathe.
Which joints fit inside?
The pre-roll slot takes joints with a filter diameter of up to 12 mm and a length of up to 14 cm. With standard king size papers you still have room to spare.
How do I use the built-in ashtray?
The pocket ashtray on the underside is meant for extinguished ends, it holds 4 to 5 used filters. Please don't stub out anything still glowing in there: the ToGo is printed from corn, not built like a volcano.
How big and how heavy is the Baukasten ToGo?
11.8 cm long, 6.5 cm wide, 2.1 cm high. The empty case weighs 80 g. Barely bigger than what it carries.
Will my Rainbow look exactly like the photo?
No, and that is on purpose. With Rainbow the color gradient forms during 3D printing, which makes every piece one of a kind. The color proportions and their order differ from piece to piece. The product photo shows three Rainbow pieces side by side so you can see how much they vary. We cannot guarantee a specific color distribution.
Roll up. Clip on. Head out.
Two J's, fire and an ashtray in one case that just rides along on your backpack. Pick your color, pick your version and grab your Baukasten ToGo.
Prefer to roll on the spot instead of pre-rolling? Then take a look at the Baukasten Mini.
